Modular Belt Types and Options

ST Machinery Conveyors are offered with a wide variety of modular plastic belt choices to suit application needs.

Differing plastic belt styles, FDA food grade materials and colours are available in addition to a variety of product support flights in differing heights.

Straight running MPB (modular plastic belt)

Straight running plastic modular belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: Closed Backflex radius: 65.0 mm (2.6 in) Pin diameter: 8.0 mm (0.31 in

uni QNB belt

This high capacity 1.0 inch pitch belt is the optimum solution for all corrugated transportation applications from your corrugated down-stacker take away to the end of your process

Sideflex Belt

A 25.4mm pitch side flexing belt with a turning inside radius of 1.7 x belt width for Curved Conveyors. Available in widths from 76mm in increments of 76mm. Product flight supports available in 25mm and 50mm high and optional rubber grip top surface. Standard materials are Polypropylene and Acetal.

Uni-Flights

• 19.1mm pitch – A straight running modular belt available with a closed or open area up to 22%.

Widths start from 76mm in increments of 76mm. Product flight supports available in 25mm, 50mm and 75mm height.

Standard materials are Polypropylene whilst Nylon can be used for high temperature applications. Also available in rubber grip top.

• 25.4mm pitch – A straight running closed top modular belt available in widths from 76mm in increments of 76mm.

Product flight supports available in 25mm, 50mm and 75mm height. Standard materials are Polypropylene and Acetal.

• 50.8mm pitch – A very strong straight running closed modular belt for heavy duty conveying applications.

Available in widths from 151mm in varying increments up to 2512mm wide.

Product flight supports available from 25mm to 150mm in height.

Standard materials are Polypropylene and PE whilst Acetal can be used for high temperature applications.

Also available in rubber grip top.